Cytoskeletal elements in cotton seed hair developmentin vitro: Their possible regulatory role in cell wall organization

Summary The localization and orientation of cytoskeletal elements in developing cotton fibres were studied by the indirect immunofluorescence and the dry cleaving technique. Microtubules are transversely arranged to the cell axis, most probably in a flat helix, in the cortex of expanding fibres. Since the innermost deposited cellulose microfibrils always show primarily the same orientation it is postulated that the microtubules control the transverse deposition of the cellulose fibrils. Little further cell expansion takes place during secondary wall formation and the microfibril pattern corresponds to that of the cortical microtubules,e.g., in the steepness of their helicoidal turns. Microtubules with a length of 7–20 m were observed, probably they are longer. The importance of microtubule length on microfibril deposition is discussed. The density of microtubule packing is in the range of 8–14 m^-1 as in other comparable cell types. In contrast to the microtubules, actin filaments are most likely longitudinally oriented during different phases of fibre development. The dry cleaving technique reveals numerous coated pits in the plasma membrane which are not crossed by microtubules. They seem to be linked to the latter by filamentous structures.     

Inhibition of endocytosis from coated pits by acidification of the cytosol

Binding and endocytosis of the ligands transferrin, epidermal growth factor (EGF), and ricin were measured in a number of different cell lines after treatment of cells with compounds that react with SH-groups and under conditions where the cytosolic pH was lowered. N-ethylmalemide and diamide irreversibly inhibited endocytosis of all ligands tested, whereas low pH in the cytosol strongly inhibited endocytosis of transferrin and EGF. Data obtained by electron microscopy indicated that the formation of coated vesicles from coated pits is inhibited in acidified cells. Entry of ricin was much less affected, and ricin endocytosed under these conditions was able to intoxicate the cells. At low pH in the cytosol there was a calcium-dependent increase in the number of transferrin receptors at the cell surface. The increase was even larger in the presence of the calcium ionophore A23187, whereas it was completely blocked by the calmodulin antagonists trifluoperazine and W7. The results show that endocytosis from coated pits can be inhibited in a reversible way by acidification of the cytosol and they suggest that a second pathway of endocytosis exists, possibly involving formation of vesicles from uncoated areas of the membrane.     

Freeze-substitution improves the ultrastructural preservation of legume root hairs

The freeze-substitution method was applied toVicia hirsuta root hairs to test its effectiveness in improving preservation of the cell ultrastruture. Freeze-substitution almost certainly represents more faithfully the structure of the hair cell. A previously unreported ‘pyriformis’ vesicle is described. Also unique to freeze-substituted material are coated secretory vesicles; a smooth plasma membrane profile; mitochondrial ribosomes; long microfilament bundles which are associated with vesicles, mitochondria, coated pits and coated vesicles; microtubule-associated filaments; well-preserved coated vesicles and coated pits with enclosing rings; a pliciform nucleus. The results are discussed in context of previous reports using conventional fixation techniques.     

Vestured pits and vestured vessel member walls in some Indian dicotyledonous woods

NAIR, M. N. B. AND MOHAN RAM, H. Y., 1989. Vestured pits and vestured vessel member walls in some Indian dicotyledonous woods. The woods of 144 taxa belonging to 38 families of angiosperms were examined for vestured pits and vestured vessel member walls using scanning electron microscopy. Vestured pits are present in 66 taxa (belonging to ten families) and vestured vessel member walls occur in only six taxa (belonging to three families). In Ehretiaceae and Euphorbiaceae vestures are present only in certain vessel members. In Wrighlia tinctoria , perforation plates containing vestures have been observed in addition to the presence of vestured pits. A classification of vestured pits based on their morphology and distribution is proposed by us. In all the types of vestured pits, vestures are present on the margin of the outer pit aperture or on the pit chamber wall. Occasionally, they are present in the pit canal, on the margin and in the vicinity of the inner pit aperture and rarely over the inner walls of the vessel members. The functions of vestured pits are not clear, although several suggestions are made. Whether or not these structures affect wood processing is not presently understood. It appears that vestured pits and vestured vessel member walls have diagnostic rather than phylogenetic value.     

The population biology of tench, Tinea tinea (L.), in two gravel pit lakes

The populations of tench from two gravel pit lakes of contrasting habitat type were studied. The population density of tench from St Peter's Lake, which has abundant aquatic vegetation was 176 individuals ha⁻¹ (102.2 kg ha⁻¹) compared to 0.3 individuals ha⁻¹ (0.5 kg ha⁻¹) in the Main Lake which has very little aquatic vegetation. The results of ageing tench by scales, opercular bones and otoliths were compared; all three structures gave similar results up to 9 years of age, but thereafter there were difficulties in ageing using scales and care was needed in counting annuli. The oldest tench caught was 15 years old. Growth of male and female tench was similar and fitted the von Bertalanffy model; for female tench L_∞ = 573 mm, K =0.122 and for male tench L_∞ = 586 mm, K =0.114. Recruitment was variable and strong year classes occurred in years with warm summers.     

Hybridoma perfusion systems: a comparison study

The efficiency of lgM production by hybridoma cells (1) cultured in suspension; (2) entrapped in alginate beads; or (3) packed in hollowfiber cartridge bioreactors, were compared in long-term perfusion cultures. The results showed that steady-state cell concentration and antibody production, per liter of perfused medium per day, were similar when cells were either entrapped in alginate beads of maintained in suspension. These values were also similar whether cells were maintained at high density in a hollowfiber cartridge bioreactro, or at low density in suspension. This work points out that cell behavior and antibody yield are comparable overall in the various perfusion systems currently used. However, a significant reduction of antibody production appeared whenever a part of the viable cells was lost in the filtrate. The reduction was due both to a decrease of viable cell yield and a decline of lgM productivity on a percell basis. This result is well in agreement with the previously presented model of "grow or die" cell cycle system of hybridoma, which proposes that the ratio of arrested to proliferating cells in perfusion cultures, should be increased in proportion to cell retention in the bioreactor, with a concomitant increase of lgM productivity.     

Receptor-bound thrombin is not internalized through coated pits in mouse embryo cells

The localization of thrombin receptors on mouse embryo (ME) cells was examined using electron microscope (EM) immunocytological techniques. ME cells were fixed with formaldehyde, prior to thrombin binding, and thrombin visualized on cell surfaces using affinity-purified antithrombin rabbit antibody and colloidal gold labeled anti-rabbit IgG. Colloidal gold particles were found in clusters on the surface of cells incubated with thrombin. There were approximately seven particles per cluster observed in thin sections with cluster diameters ranging from 70 to 200 nm. These clusters were not observed on cells incubated without thrombin. The total number of particles present on cells incubated with and without thrombin indicate that the colloidal gold labeling is approximately 98% specific for thrombin. Only four colloidal gold particles out of approximately 1,200 were associated with coated pits. Thus the thrombin receptor clusters do not appear to associate with coated membrane regions. To determine whether receptor-bound thrombin was internalized by receptor-mediated endocytosis, ME cells were incubated with 125I-thrombin and examined using EM autoradiography and the trypsin sensitivity of 125I-thrombin which was associated with the cells. In two types of experiments, where thrombin was incubated with cells at 4 degrees C and the temperature increased to 37 degrees C and where initial incubation was at 37 degrees C, the receptor-directed specific internalization proceeded at approximately the same rate as nonspecific internalization. These studies indicate that thrombin that binds to its receptors on ME cells is not rapidly internalized by receptor-mediated endocytosis.     

Modulation of transmembrane pressure in manufacturing scale tangential flow filtration N-1 perfusion seed culture

Mammalian cells were grown to high density in a 3,000 L culture using perfusion with hollow fibers operated in a tangential flow filtration mode. The high-density culture was used to inoculate the production stage of a biomanufacturing process. At constant permeate flux operation, increased transmembrane pressures (TMPs) were observed on the final day of the manufacturing batches. Small scale studies suggested that the filters were not irreversibly fouled, but rather exposed to membrane concentration polarization that could be relieved by tangential sweeping of the hollow fibers. Studies were undertaken to analyze parameters that influence the hydrodynamic profile within hollow fibers; including filter area, cell density, recirculation flow rate, and permeate flow rate. Results indicated that permeate flow rate had the greatest influence on modulating TMP. Further evaluation showed a significant decrease in TMP when permeate flow was reduced, and this occurred without any negative effect on cell growth or viability. Hence, a 30% reduction of permeate flow rate was implemented at manufacturing scale. A stable operation was achieved as TMP was successfully reduced by 75% while preserving all critical factors for performance in the perfusion bioreactor.     

Very high density of CHO cells in perfusion by ATF or TFF in WAVE bioreactor™. Part I. Effect of the cell density on the process

High cell density perfusion process of antibody producing CHO cells was developed in disposable WAVE Bioreactor? using external hollow fiber filter as cell separation device. Both “classical” tangential flow filtration (TFF) and alternating tangential flow system (ATF) equipment were used and compared. Consistency of both TFF‐ and ATF‐based cultures was shown at 20–35 × 10⁶ cells/mL density stabilized by cell bleeds. To minimize the nutrients deprivation and by‐product accumulation, a perfusion rate correlated to the cell density was applied. The cells were maintained by cell bleeds at density 0.9–1.3 × 10⁸ cells/mL in growing state and at high viability for more than 2 weeks. Finally, with the present settings, maximal cell densities of 2.14 × 10⁸ cells/mL, achieved for the first time in a wave‐induced bioreactor, and 1.32 × 10⁸ cells/mL were reached using TFF and ATF systems, respectively. Using TFF, the cell density was limited by the membrane capacity for the encountered high viscosity and by the pCO₂ level. Using ATF, the cell density was limited by the vacuum capacity failing to pull the highly viscous fluid. Thus, the TFF system allowed reaching higher cell densities. The TFF inlet pressure was highly correlated to the viscosity leading to the development of a model of this pressure, which is a useful tool for hollow fiber design of TFF and ATF. At very high cell density, the viscosity introduced physical limitations. This led us to recommend cell densities under 1.46 × 10⁸ cell/mL based on the analysis of the theoretical distance between the cells for the present cell line. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:754–767, 2013